Structure, performance and characteristics of Cotton Polyester Fabric For Workwear

- Apr 19, 2019-

The Cotton Polyester Fabric For Workwear used for tooling is a mixture of polyester and cotton when handled, and it is not as comfortable as cotton. Not as good as cotton on the cotton. Polyester is the largest variety of synthetic fibers. Polyester has several trade names, and “Polyester” is a generic name in China. The chemical name is polyethylene terephthalate, which is usually a chemical polymerization. Therefore, the scientific name often refers to "poly" polyester, also known as polyester.


Structure and performance of cotton polyester fabric used for tooling


The structure of the cotton-polyester fabric used for tooling is determined by the spinning holes, and the conventional polyester has a circular cross section and no intermediate cavity. By changing the cross-sectional shape of the fiber, a shaped fiber can be produced. Improve brightness and cohesion. The fiber macromolecule has a high degree of crystallinity and a high degree of orientation, so the fiber has a high strength (20 times that of viscose fiber) and has good abrasion resistance. It has good elasticity and is not easy to wrinkle. It has good shape retention, good light resistance and heat resistance. It is quick-drying and non-iron after washing, and has good washing and wearability.


The polyester polyester fabric used for tooling is a chemical fiber fabric that does not easily wick away perspiration. It feels like a squeaky pull, it is easy to get static electricity, and it looks bright on the slant. The fiber has the characteristics of crispness, smoothness, quick drying and durability, and is well received by consumers. At present, the blended varieties have developed from the original ratio of 65% polyester to 35% cotton to 65:35, 55:45, 50:50, 20:80 and other different proportions of blended fabrics, the purpose is to adapt to different levels. Consumer demand.